Piccolo 10

Piccolo 10 is a versatile pin light that offers various installation options. It can be installed within joinery units to showcase ornaments, placed under shelving for subtle task illumination, or positioned above walls or in between slats to accentuate features.


Piccolo 10 can be installed in the ground to serve as uplighters, accentuating both interior and exterior walls' standout features.

SPECIFICATIONS

Power: 3W

Lumen Output: 150lm

Colour Temperature: 3000k

Beam Angle: N/A

Input: 12V

Adjustability: Fixed

Cut Out: Ø33mm

IP Rating: IP67

Wiring Info: 240V to driver - L/V to fitting. If more than one fitting, wire in parallel

Depth: 13mm. Allow 10mm more


FINISH OPTIONS

Glossy Black


PRODUCT GALLERY

DOWNLOADS

Photometric IES Files


  • • 36W/12V Driver (Dimmable) - Remote Driver

    • 75W/12V Driver (Dimmable) - Remote Driver

  • • 36W/12V Driver (Dimmable) - Remote Driver

    • 75W/12V Driver (Dimmable) - Remote Driver

    • 150W/12V Driver (Dimmable) - Remote Driver

    • 240W/12V Driver (Dimmable) - Remote Driver

WIRING INFORMATION

Constant Voltage 12V Drivers MUST be wired in parallel. See the below diagram on how to wire in parallel.

Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.

Failure to adhere to these guidelines will result in voiding the warranty.

DRIVER OPTIONS

Previous
Previous

Stella Mini + Hood Pin Light

Next
Next

Flush Mount Pin Light