Stella Mini + Hood
Stella Mini + Hood belongs to our Dark Range of outdoor lighting fixtures, crafted with a natural antique brass finish. Stella + Hood is an outdoor recessed, low-level lighting solution crafted to elevate pathway illumination along external walkways and gardens, crafting an inviting journey through your outdoor spaces. Additionally, for indoor applications, providing effective lighting in interior areas like hallways, bedrooms, and primary living spaces.
Stella Mini can be installed in the ground to serve as uplighters, accentuating both interior and exterior walls' standout features.
SPECIFICATIONS
Power: 3W
Lumen Output: 300lm
Colour Temperature: 3000k
Beam Angle: N/A
Input: 12V or 350mA versions available
Adjustability: Fixed
Cut Out: Ø18mm
IP Rating: IP67
350mA Wiring Info: 240v to the driver, low voltage to fitting. If more than one fitting is wired, must be wired in series.
12V Wiring Info : 240v to the driver, low voltage to fitting. If more than one fitting is wired, must be wired in parallel.
Depth: 38mm
FINISH OPTIONS
Antique Brass
DOWNLOADS
Photometric IES Files
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
• 150W/12V Driver (Dimmable) - Remote Driver
• 240W/12V Driver (Dimmable) - Remote Driver
WIRING INFORMATION FOR 12V VERSION
Constant Voltage 12V Drivers MUST be wired in parallel. See the below diagram on how to wire in parallel.
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.
DRIVER OPTIONS
PRODUCT GALLERY
DOWNLOADS
Photometric IES Files
WIRING INFORMATION FOR 350mA VERSION
Constant Current 350mA Drivers MUST be wired in series. See the below diagram on how to wire in series. Drivers are recommended to be set at 300mA with a maximum of 5 fittings on one driver.
DRIVER OPTIONS
-
• 12W/350mA Driver (Dimmable) - Remote Driver
• 15W/350mA Driver (Dimmable) - Remote Driver
-
• 12W/350mA Driver (Dimmable) - Remote Driver
• 36W/350mA Driver (Dimmable) - Remote Driver
