Flush Mount
Flush Mount is a versatile pin light that offers various installation options. It can be installed within joinery units to showcase ornaments, placed under shelving for subtle task illumination, or positioned above walls or in between slats to accentuate features
The optimal placement for installation is beneath exposed stair nosings, allowing light to cascade onto the stair treads below, effectively illuminating the staircase.
SPECIFICATIONS
Power: 1W
Lumen Output: 120lm
Colour Temperature: 3000k
Beam Angle: 120°
Input: DC 12V
Adjustability: Fixed
Cut Out: Ø12mm
IP Rating: IP68
Wiring Info: 240V to driver - L/V to fitting. If more than one fitting, wire in parallel
Depth: 24mm. Allow 10mm more
FINISH OPTIONS
Glossy Black
PRODUCT GALLERY
DOWNLOADS
Photometric IES Files
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
• 150W/12V Driver (Dimmable) - Remote Driver
• 240W/12V Driver (Dimmable) - Remote Driver
WIRING INFORMATION
Constant Voltage 12V Drivers MUST be wired in parallel. See the below diagram on how to wire in parallel.