Clover
Clover is a versatile pin light that offers various installation options. It can be installed under shelving for subtle task illumination, or positioned above walls or in between slats to accentuate features.
Clovers can also be affixed to vertical surfaces to function as low-level lights. They offer gentle illumination for pathways or stairwells, enhancing your home's journey.
SPECIFICATIONS
Power: 1W
Lumen Output: 60lm
Colour Temperature: 3000k
Beam Angle: 30°
Input: 24V
Adjustability: Fixed
Cut Out: 38mm with conduit, 35mm without conduit
IP Rating: IP45
Wiring Info: Driver Remote, Low Voltage to fitting
Depth: 61mm without conduit, 40mm without conduit
FINISH OPTIONS
White
Black
PRODUCT GALLERY
DOWNLOADS
Photometric IES Files
WIRING INFORMATION
DRIVER OPTIONS
-
• 36W/24V Driver - Remote Driver
• 75W/24V Driver - Remote Driver
-
• 36W/24V DALI Driver (Dimmable) - Remote Driver
• 75W/24V DALI Driver (Dimmable) - Remote Driver
Constant Voltage 24V Drivers MUST be wired in parallel. See the below diagram on how to wire in parallel.
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.