Frida Adjustable
Frida is an adjustable artlighter designed for recessed installation. With its impressive 2-meter by 2-meter light distribution, it is ideal for illuminating artworks of any dimension.
SPECIFICATIONS
Power: 15W
Lumen Output: 920lm
Colour Temperature: 3000k or CCT (2700k - 6500k) Available
Beam Angle: Asymmetrical 2m x 2m Square
Input: 450mA - Low Voltage.
Adjustability: Adjustable
Cut Out: 153mm x 47m - Dimensions vary based on finish
Finishes: White/White with Black internal trim
IP Rating: IP20
Wiring Info: 240V to driver Remote or Local. 1 Fitting per driver
Depth: 50mm. Allow 10mm more in the ceiling
FINISH OPTIONS
Matte White
White & Black
PRODUCT GALLERY
DOWNLOADS
Specification Data Sheet
WIRING INFORMATION
Constant Current 350mA Drivers MUST be wired in series. See the below diagram on how to wire in series. Drivers are recommended to be set at 300mA with a maximum of 5 fittings on one driver.
DRIVER OPTIONS
-
• 12W/350mA Driver (Dimmable) - Remote Driver
• 15W/350mA Driver (Dimmable) - Remote Driver
-
• 12W/350mA Driver (Dimmable) - Remote Driver
• 36W/350mA Driver (Dimmable) - Remote Driver
-
• Integral CCT Local Driver (Dimmable)