Stella
Stella belongs to our Dark Range of outdoor lighting fixtures, crafted with a natural antique brass finish. Stella is a multifunctional pin light known for its installation flexibility. It can be placed in ceilings or in the ground to provide uplighting that beautifully enhances feature timber or sandstone walls, making it suitable for both interior and exterior applications.
SPECIFICATIONS
Power: 3W
Lumen Output: 300lm
Colour Temperature: 3000k
Beam Angle: N/A
Input: 12V
Adjustability: N/A
Cut Out: Ø 33mm
IP Rating: IP67
Wiring Info: 240v to the driver, low voltage to fitting. If more than one fitting is wired, must be wired in parallel.
Depth: 50mm
FINISH OPTIONS
Antique Brass
PRODUCT GALLERY
DOWNLOADS
Photometric IES Files
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
• 150W/12V Driver (Dimmable) - Remote Driver
• 240W/12V Driver (Dimmable) - Remote Driver
WIRING INFORMATION
Constant Voltage 12V Drivers MUST be wired in parallel. See the below diagram on how to wire in parallel.
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.
DRIVER OPTIONS
