Holly

Holly is a recessed, low-level light suitable for interior use in hallways, bedrooms, and primary living areas, enriching the journey through your home with well-illuminated pathways.

SPECIFICATIONS

Power: 1.5W

Lumen Output: 100lm

Colour Temperature: 3000k

Beam Angle: N/A

Input: 24V

Adjustability: Fixed

Cut Out: 70mm x 40mm

IP Rating: IP22

Wiring Info: Driver Remote, Low Voltage to fitting

Depth: 32mm without wall box, 57mm with wall box

Notes: Optional wall box for concrete or block wall.


FINISH OPTIONS

Brushed Grey

Brushed Gold

Brushed White



PRODUCT GALLERY

DOWNLOADS

Photometric IES Files

WIRING INFORMATION

DRIVER OPTIONS

  • • 36W/24V Driver - Remote Driver

    • 75W/24V Driver - Remote Driver

  • • 36W/24V DALI Driver (Dimmable) - Remote Driver

    • 75W/24V DALI Driver (Dimmable) - Remote Driver

Constant Voltage 24V Drivers MUST be wired in parallel. See the below diagram on how to wire in parallel.

Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.

Failure to adhere to these guidelines will result in voiding the warranty.

Previous
Previous

Stella + Hood Pin Light - Interior Low Level Light