Button
Button is a versatile pin light that offers various installation options. It can be installed within joinery units to showcase ornaments, placed under shelving for subtle task illumination, or positioned above walls or in between slats to accentuate features.
Buttons can be installed in the ground to serve as uplighters, accentuating both interior and exterior walls' standout features. They can also be affixed to vertical surfaces to function as low-level lights, offering gentle illumination for pathways or stairwells, enhancing your home's journey.
SPECIFICATIONS
Power: 1W
Lumen Output: 60lm
Colour Temperature: 3000k
Beam Angle: 30°
Input: 350mA
Adjustability: Fixed
Cut Out: Ø19mm
IP Rating: IP65
Wiring Info: 240V to driver - L/V to fitting. If more than one fitting, wire in series
Depth: 34mm. Allow 10mm more
FINISH OPTIONS
White
PRODUCT GALLERY
DOWNLOADS
Photometric IES Files
WIRING INFORMATION
Constant Current 350mA Drivers MUST be wired in series. See the below diagram on how to wire in series. Drivers are recommended to be set at 300mA with a maximum of 5 fittings on one driver.
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.
DRIVER OPTIONS
-
• 12W/350mA Driver (Dimmable) - Remote Driver
• 15W/350mA Driver (Dimmable) - Remote Driver
-
• 12W/350mA Driver (Dimmable) - Remote Driver
• 36W/350mA Driver (Dimmable) - Remote Driver
