Titan One
Titan One belongs to our Dark Range of outdoor lighting fixtures, crafted with a natural antique brass finish. It boasts a sophisticated and refined design, perfect for providing external directional task lighting in various settings such as terraces, above BBQ or outdoor kitchens, pool decks, gardens, and other outdoor activity areas. Additionally, it proves highly practical for illuminating court areas or service pathways.
What sets Titan Two apart is its distinctive shape, which functions as a glare shield, effectively concealing the light source and delivering subtle, unobtrusive illumination.
SPECIFICATIONS
Power: 1 x 4W or 6W on Request
Lumen Output: 400lm
Colour Temperature: 3000k
Beam Angle: 65°
Input: 12V
Adjustability: 90°
Cut Out: Surface Mounted
IP Rating: IP65
Wiring Info: 240v to the driver, low voltage to fitting. If more than one fitting is wired, must be wired in parallel.
Base Size: Diameter - 75mm, Cable Entry- Centre, Height - 190mm
Our Brass luminaires are suitable for all areas, including coastal environments. Brass will oxidize over time from a polished look to a natural patina and Bronze will darken over time. This will not compromise the structural integrity.
PRODUCT GALLERY
DOWNLOADS
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
• 150W/12V Driver (Dimmable) - Remote Driver
• 240W/12V Driver (Dimmable) - Remote Driver
WIRING INFORMATION
Constant Voltage 12V Drivers MUST be wired in parallel. See the below diagram on how to wire in parallel.
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.
DRIVER OPTIONS
