Stella + Hood
Stella + Hood belongs to our Dark Range of outdoor lighting fixtures, crafted with a natural antique brass finish. Stella + Hood is an outdoor recessed, low-level lighting solution crafted to elevate pathway illumination along external walkways and gardens, crafting an inviting journey through your outdoor spaces. Additionally, it excels in indoor applications, providing effective lighting in interior areas like hallways, bedrooms, and primary living spaces.
Stella + Hood can be installed in the ground to serve as uplighters, accentuating both interior and exterior walls' standout features.
SPECIFICATIONS
Power: 3W
Lumen Output: 300lm
Colour Temperature: 3000k
Beam Angle: N/A
Input: 12v
Adjustability: N/A
Cut Out: Ø 33mm
IP Rating: IP67
Wiring Info: 240V to driver, low voltage to fitting. If more than one fitting, wire in parallel.
Depth: 50mm
FINISH OPTIONS
Antique Brass
PRODUCT GALLERY
DOWNLOADS
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
-
• 36W/12V Driver (Dimmable) - Remote Driver
• 75W/12V Driver (Dimmable) - Remote Driver
WIRING INFORMATION
Constant Voltage 12V Drivers MUST be wired in parallel. See the below diagram on how to wire in parallel.
Electricians must use silicon-based heat shrink to secure the back of the fitting, ensuring there is no water leakage and allowing for proper drainage during careful installation to prevent water damage.
Failure to adhere to these guidelines will result in voiding the warranty.
DRIVER OPTIONS
